Anemometers and Windvanes in action!
Windspeed Ltd (Vector Instruments), 113 Marsh Road, RHYL, N. Wales, LL18 2AB, United Kingdom.
Windspeed Limited
Click for info on: Wind Speed sensors Click for info on: Wind Direction Sensors Click for info on: Masts + Mountings Click for info on: Air Temperature sensors Click for info on: Masts + Mountings Anemometer, Windvane and Air Temperature sensors
 Saturday, December 21 2024  Home [arrow]  Products [arrow]  Windvanes [arrow]  W200P (1K Pot) Search site:  

Latest Weather...
(Rhyl, N.Wales, UK)
Wind Speed:  4.4 mph
Wind Direction:  301 °
Air Temp.:  8.7 °C
Rel. Humidity:  86.8 %
Rain (last Hr):  0.2 mm
(updated at: 16:22 UTC)

Please call/email us if you need:




Translate using Google:
====
====
====
======


Notes:
This website requires Javascript and Cookies to be enabled for correct operation. Privacy Policy...

Use subject to Terms & Conditions.

GDPR: to request or decline communications containing marketing, news & updates from us, click HERE.
Celebrating more than 50 years manufacturing & servicing High Quality Vector Instruments Anemometers and Windvanes at Windspeed Ltd
W200P Potentiometer Windvane
 
Datasheet: login to download The premium quality W200P windvane is a popular choice for demanding Wind Assessment applications, having "First Class" performance to meet the requirements of the IEC61400-12-1 standard.

The W200P Potentiometer Windvane incorporates a precision wire-wound potentiometer as a shaft angle transducer, enabling wind direction sensed by the F20 fin to be accurately determined when connected to suitable measuring equipment, such as a data logger or PLC.

The potentiometer has the lowest possible torque consistent with long life and reliability, the small gap at north being filled with an insulating material to ensure smooth operation over the full 360°.

The standard F20 vane-arm (fin) assembly is attached using the unique Porton™ gravity fastener allowing good alignment and rapid attachment and release. A large alternative vane-arm (fin), type F20/LV is available where improved sensitivity is required.

Construction is from anodised aluminium alloys and stainless steels for exposed parts. Combined with a hard plastic (upper) bearing and precision ball-races, the result is an instrument suitable for continuous exposure to the weather, with a long service interval.

Options for this windvane include:

This is our most popular windvane and is suitable for most applications. Please contact us for advice on the correct choice of options and accessories and suggestions on measuring techniques for best results in your application.

This windvane is Fixed Reference, that is to say that it must be aligned with north during installation and fixed in that position/orientation during operation. For mobile platforms or situations where the orentation of the platform is unknown, a self-referencing windvane such as our SRW1G would be appropriate.
The low 1K Ohm resistance of the potentiometer is no barrier to low power operation as most applications where power is critical use data loggers which are capable of energising the potentiometer only for a short interval during the actual measurement.

The high specification precision potentiometer used in this windvane has been extensively tested by us, both in the lab and in the field, and has been found to be the most robust and reliable of all the types we have examined. It is connected with 2-wires to each end of the track and one to the wiper enabling it's use in a variety of bridge and potentiometric measurement configurations (Note: for best results, it is not recommended that this instrument be configured as a variable resistance).

The current W200P model is also referred to as W200P-01.

This instrument is commonly used in conjunction with our A100L2, A100LK, A100LM, and A100R anemometers. The recommended mounting adaptors for use with this instrument are our type 405 and 405-1 series.

Specification Highlights:

  • Threshold:
    		• 0.6m/s (standard), 0.75m/s (/WR), 0.5m/s (/LV)
  • Distance Constant:
    		• 2.3m (standard), 2.4m (/LV)
  • Damping Ratio:
    		• 0.2m (standard), 0.24m (/LV)
  • Recovery Distance:
    		• 0.51m (standard), 0.54m (/LV)
  • Damped Natural Wavelength:
    		• 3.4m (standard), 3.6m (/LV)
  • Repeatability:
    		• +/- 0.5 ° if vane removed and replaced (note: no measurable backlash movement during use)
  • Life of Potentiometer:
    		• 5x107 cycles (10 years typical exposure)
  • Service Interval:
    		• 4 to 5 years
  • Accuracy:
    		• +/-3° in steady winds over 5m/s (6m/s /WR, 3.5m/s /LV), with +/-2° obtainable following calibration.
  • Maximum Wind Speed:
    		• over 75 m/s (standard), over 60m/s (/LV)
  • Range:
    		• 360° mechanical angle, continuous rotation allowed
  • Temperature Range:
    		• -50 to +70 °C
  • Potentiometer Resistance:
    		• 1000 Ohms (+/- 10%)
  • Wiper Current:
    		• 50uA recommended (20mA absolute maximum)
  • Potentiometer Voltage:
    		• 1V to 5V (recommended), 20V absolute maximum.
  • Potentiometer Continuity Angle:
    		• 357.7 +/- 1.5° (2.3° gap at north)
  • Potentiometer Variation Angle:
    		• 356.5 +/-1.5° (3.5° dead-band)
  • Potentiometer Resolution:
    		• +/-0.2°
  • Potentiometer Independent Non-Linearity:
    		• +/-0.25%; (unloaded)
  • Connections:
    		• 6 wire screened cable. Screen insulated at instrument end, black connects to body. Red & White connect to 360° end and Blue & Yellow connect to 0° end of pot. Green connects to wiper.
  • Fin (Vane-Arm):
    		• type F20 as standard.
  • Dimensions:
    		• This instrument is constructed using our standard fin and windvane body design and dimensions.
  • Wiring/Connections (Cable colours):
    		• For wiring details click HERE
  • Cable:
    		• 3m (9ft10in) permanently attached 6-conductor* cable with braided shield/screen as standard. Longer lengths are available to order (up to 115m). Spec: Def Stan 61-12 part 4, 0.22mm²(∼24AWG). *Note: 8-conductor used for /HE4 models.
  • Calibration Certificate (optional extra):
    		• The W200P windvane is available with an IEC/MEASNET Calibration Certificate (for an additional charge)
  • Regulatory/Certifications: :
    		• UKCA CE marks CE and UKCA Marked for RoHS3 (RoHS2+Phthlatales amendments) and EMC

    Notes:
    Recommendations:
  • Reliability & Safety
    • Specifications are correct at time of writing and may change without notice. Please contact us to confirm the latest specifications.

    Additional Information:

    FAQ: IP Ratings
    Please call/email us if you would like access to additional product information, data and specification sheets for this product.
    Windspeed Ltd (Vector Instruments)
    		 Windspeed Limited (trading as Vector Instruments),
    113 Marsh Road, RHYL, North Wales, LL18 2AB, United Kingdom
    Tel: +44 (0) 1745 350700
    Email: sales@windspeed.co.uk
     
    Website design and content is copyright (c) 2003-2024 Windspeed Limited (unless otherise stated). All trademarks are acknowledged.