Anemometers and Windvanes in action!
Windspeed Ltd (Vector Instruments), 113 Marsh Road, RHYL, N. Wales, LL18 2AB, United Kingdom.
Windspeed Limited
Click for info on: Wind Speed sensors Click for info on: Wind Direction Sensors Click for info on: Masts + Mountings Click for info on: Air Temperature sensors Click for info on: Masts + Mountings Anemometer, Windvane and Air Temperature sensors
 Thursday, December 26 2024  Home [arrow]  Products [arrow]  Alarms/Indicators [arrow]  D623/E923 Search site:  

Latest Weather...
(Rhyl, N.Wales, UK)
Wind Speed:  4.9 mph
Wind Direction:  184 °
Air Temp.:  4.4 °C
Rel. Humidity:  100 %
Rain (last Hr):  0.0 mm
(updated at: 07:21 UTC)

Please call/email us if you need:




Translate using Google:
====
====
====
======


Notes:
This website requires Javascript and Cookies to be enabled for correct operation. Privacy Policy...

Use subject to Terms & Conditions.

GDPR: to request or decline communications containing marketing, news & updates from us, click HERE.
Celebrating more than 50 years manufacturing & servicing High Quality Vector Instruments Anemometers and Windvanes at Windspeed Ltd
D623 Windspeed Alarm/Indicator and E923 Slave Display
 
NOTE: THIS PRODUCT IS NO LONGER AVAILABLE.
Please contact us if you require service or spares for existing units.

Our D623 Digital Wind Speed Alarm/Indicator provides a solution for many applications requiring a simple display of windspeed and a single user adjustable alarm level (trip point).

For applications requiring multiple alarms or customised alarms which are combinations of wind speed and direction please refer to our CHM Series.

The standard D623 set includes an A100L2 anemometer with 10m cable, a type 405 mast adaptor (to fit 1" diameter mast top) and the D623 indicator/alarm unit itself. A longer instrument cable (or a junction box and extension cable) plus other types of mast adaptor to fit different mast sizes are available to order.
The D623 indicator is housed in a wall-mountable IP65 (weatherproof) enclosure and features a 14mm high brightness digital display. The user adjustable alarm drives a volt-free changeover relay contact (a separate contactor/relay will be required to switch large/mains loads)

Installation is relatively simple, the user simply has to fit the anemometer to the top of a suitable mast (not included in the set, but see WM4 and WM5 masts) using the 405 adaptor and mount the D623 unit on a convenient wall. Wiring consists of connecting the anemometer to the D623 unit (6 wires into screw-terminals) and connecting power (2 or 3 wires into screw-terminals). The system is powered from 230Vac 50/60Hz as standard, with 115Vac or 10..30Vdc options available to order.

The analog/voltage output from the A100L2 anemometer is used by the D623 alarm/display, however the pulse/frequency signal (10Hz/knot, i.e. 0..1500Hz = 0..150Knots) from the anemometer is also available on a screw terminal at ther rear of the D623 and could be fed into a PLC or similar control system if the application requires it.

Datasheet: login to download
The D623 can also drive a second matching "slave" display, the E923, to provide a second display (and second alarm relay) in an additional position where necessary.

Versions of the D623 and E923 are available without IP65 enclosures and are suitable for mounting in a control panel in a 1/8DIN cutout.

NOTE: THIS PRODUCT IS NO LONGER AVAILABLE.
Specification Highlights:

  • Display:
    		• 14.2mm Red LED, 3? digits, updated twice/sec.
  • Display Range:
    		• 0.0 to 150.0 Knots (other ranges/units to order)
  • Display Averaging:
    		• Selectable for gust or mean (sec or 30sec nominal averages)
  • Display Resolution:
    		• 0.1 knot
  • Anemometer type/cable:
    		• A100L2 with 10m cable
  • Mast-top fitting:
    		• Type 405, to suit 1inch dia. mast/pole (other sizes to order)
  • Operating Temperature:
    		• Display: 0..50 °C (-10..+70 °C storage)
    Anemometer: -30..+70 °C
  • Max. Wind Speed:
    		• In excess of 75m/s.
  • Supply Voltage:
    		• 230VAC 50/60Hz (115VAC or 10-30VDC to order)
  • Alarm Indication:
    		• High Brightness LED
  • Alarm Setpoint Adjutment:
    		• Push-buttons on display front panel (user adjustable)
  • Auxilliary Outputs:
    		• 5v(peak) squarewave (10Hz/Knot) and 0..150mV=0..150Knots (into high-impedance load).
  • Connections:
    		• Screw Terminals
  • Alarm Hysteresis:
    		• Fixed (approx 3%)
  • Alarm Relay:
    		• Single-pole changeover, rated 2A@240VAC

    Notes:
    Specifications are correct at time of writing and may change without notice. Please contact us to confirm the latest specifications.
    Important: Wind Alarms - Note/Disclaimer relating to their use.  
    Windspeed Ltd (Vector Instruments)
    		 Windspeed Limited (trading as Vector Instruments),
    113 Marsh Road, RHYL, North Wales, LL18 2AB, United Kingdom
    Tel: +44 (0) 1745 350700
    Email: sales@windspeed.co.uk
     
    Website design and content is copyright (c) 2003-2024 Windspeed Limited (unless otherise stated). All trademarks are acknowledged.