Anemometers and Windvanes in action!
Windspeed Ltd (Vector Instruments), 113 Marsh Road, RHYL, N. Wales, LL18 2AB, United Kingdom.
Windspeed Limited
Click for info on: Wind Speed sensors Click for info on: Wind Direction Sensors Click for info on: Masts + Mountings Click for info on: Air Temperature sensors Click for info on: Masts + Mountings Anemometer, Windvane and Air Temperature sensors
 Thursday, November 21 2024  Home [arrow]  Products [arrow]  Mounting Hardware [arrow]  Single Instrument Search site:  

Latest Weather...
(Rhyl, N.Wales, UK)
Wind Speed:  4.3 mph
Wind Direction:  180 °
Air Temp.:  -1.4 °C
Rel. Humidity:  99.7 %
(updated at: 09:01 UTC)

Please call/email us if you need:




Translate using Google:
====
====
====
======


Notes:
This website requires Javascript and Cookies to be enabled for correct operation. Privacy Policy...

Use subject to Terms & Conditions.

GDPR: to request or decline communications containing marketing, news & updates from us, click HERE.
Celebrating more than 50 years manufacturing & servicing High Quality Vector Instruments Anemometers and Windvanes at Windspeed Ltd
Single Instrument Pole Mounts/Adaptors, types 405, 405/27P and 405/135
 
The 405 range of Single Mount Adaptors are machined from aluminium alloy then anodised for corrosion resistance and long life. Fixings are stainless steel.

These mounting adaptors are designed to fit a range of mast/pole/boom top sizes in order to mount A100 series anemometers as well as W200 Series Windvanes (see table below).

For quoted/highest accuracy and "First Class" performance A100 series anemometers must be mounted using 405 or 405/27P mounts. Anemometers supplied with MEASNET calibration certificates are calibrated on a 1inch pole & 405 mount - use of a significantly larger diameter pole or mounting-adapter is likely to invalidate the calibration.

The large 405/135 mounting adapter should NOT be used if First Class performance is required (e.g. in Wind Energy related applications).

405 series pole mount adapters for A100 and W200P series wind sensors

The 405 (for 1 inch pole) and 405/27P (for 27 mm pole, or 3/4 inch IPS/NPS pole) both include a machined slot which allows the instrument cable to fit snugly against the mount.

Use of the 405 type (or similarly sized 405/27P type) is required for high-accuracy "First Class" applications.

The 405 mount is used for MEASNET calibrations of our anemometers, and was also used for the A100 series classification tests, so use of a 1 inch pole and the 405 (or 27mm pole and 405/27P) is necessary to ensure that "First Class" performance is achieved.

A larger 405/135 mount is available to fit 35mm (1.35 inch = 1 inch BSP) diameter mast tops, but it is not suitable for high-accuracy, or "First Class", applications because the increased bulk of this larger mount/pole combination interferes slightly with the airflow past the anemometer and can have a small effect on the calibration and performance.

We always advise that an anemometer is calibrated using the mounting adaptor (and representative pole) that will be used in the final installation.

A version of the 405 to suit 0.5”/13mm poles is NOT available because such small poles are usually not strong/stiff enough to support our sensors.

Dimensions of 405 series pole mount adapters for A100 and W200P series wind sensors

 
Please call/email us if you would like access to additional product information, data and specification sheets for this product.
Windspeed Ltd (Vector Instruments)
 Windspeed Limited (trading as Vector Instruments),
113 Marsh Road, RHYL, North Wales, LL18 2AB, United Kingdom
Tel: +44 (0) 1745 350700
Email: sales@windspeed.co.uk
 
Website design and content is copyright (c) 2003-2024 Windspeed Limited (unless otherise stated). All trademarks are acknowledged.